Plant Identification

Plant Identification
About 9 minutes Vegetation management

Plant Identification

In this module, you’ll learn how to tell which plants stay on a utility right-of-way and which do not, and how to look at a plant so you can find out what it is.

Learning objectives

After completing this module, you will be able to:

  • Explain what makes a plant compatible or incompatible.
  • Tell a woody plant from an herbaceous one.
  • Describe a leaf by its arrangement and its type.
  • Use a plant ID app and a field guide to check a plant.
An outstretched hand turns over a leaf at the edge of a leafy green shrub.

Why this work matters

On a utility right-of-way, some plants are treated or removed and others are left to grow. You can only make that call if you know what you are looking at.

Knowing which plants fit the management goals for a right-of-way, and which do not, is what keeps it safe and sustainable.

Where you come in

Plant identification training usually pairs an online course with hands-on sessions in the field. This module is the online part. Take it before your first field session.

What you’ll learn

  1. What makes a plant one to keep or one to remove.
  2. How to read a plant, starting with the whole plant and then the leaf.
  3. A few plants you will meet in the field.
  4. The tools that help you check a plant before you act.

Compatible and incompatible

Every plant on a right-of-way falls into one of two groups.

Compatible

Grasses, forbs and low-growing shrubs. They stay low enough for the place they grow, so they can be left.

Incompatible

Tall-growing woody plants that can reach the wires, and invasive plants. These are the plants the work is aimed at.

Compatible plants do a job. They cover the ground and compete with tall-growing trees, which makes it less likely that those trees get established. Treating a compatible plant by mistake works against that.

Your company’s vegetation guidelines will usually include a list of compatible species and a list of incompatible and invasive species for the area you work in.

Where it grows matters

Many utilities manage a transmission right-of-way as two zones. The same shrub can be fine in one and a problem in the other.

Cross-section of a transmission right-of-way. The wire zone is the middle of the right-of-way, under the tower, with low grasses and wildflowers. A border zone on each side holds shrubs that get taller toward the edge. Tall trees stand off the right-of-way.
  • Wire zone. The middle of the right-of-way, under the wires. Plants here stay low when fully grown, within the height limit your company’s guidelines set.
  • Border zone. The strips along both edges. Taller shrubs that will not interfere with the line can stay, such as American hazelnut.

Incompatible woody species are removed from both zones.

The zone rating

A field guide or plant ID app often rates each woody plant for where it can grow on the right-of-way. This module uses three ratings.

  • Fine under the wires. Stays low enough for the wire zone. It can also stay in the border zone.
  • Fine at the edge. Suits the border zone only. In the wire zone, it is removed.
  • Remove. Incompatible in both zones.

You do not need to memorize a rating. Look it up in the field guide or the app.

The three ratings as labels. Green with a check mark: fine under the wires, in the wire zone and the border zone. Amber with an arrow to the side: fine at the edge, in the border zone only. Red with an X: remove, from both zones.

Start with the whole plant

Before you try to name a plant, step back and look at how it grows.

Think of a vehicle. You see that it is a truck before you work out the make and model. Plants work the same way.

The first question is simple. Is the plant woody or herbaceous?

Woody and herbaceous plants

A tall, many-stemmed American hazelnut shrub in full leaf.

Woody

The stem is stiff and covered in bark. It stays alive above ground through the winter. Trees and shrubs are woody.

A patch of purple coneflowers in bloom on soft green stems.

Herbaceous

The stem is soft, bends easily and has no bark. The part above ground usually dies back each year. Grasses and forbs are herbaceous.

A young woody plant can look herbaceous when it is small. Check the stem for bark.

Four words you will hear

Tree

Woody. Usually one main trunk, and it grows tall.

Shrub

Woody. Several stems from the base, and it stays shorter than a tree.

Grass

Herbaceous. Long, narrow leaves called blades.

Forb

Herbaceous. A broadleaf plant that is not a grass. Wildflowers are forbs.

Trainers and the guide use these words all the time.

How the leaves sit on the stem

Next, look at how the leaves are arranged.

  • Alternate. One leaf at a time, staggered up the stem.
  • Opposite. Two leaves at the same point, straight across from each other.
  • Whorled. Three or more leaves around the same point.
  • Basal. Leaves that come from the base of the plant.

The arrangement shows in the buds and twigs too, so it still helps after the leaves have dropped.

A diagram of four stems, labeled alternate, opposite, whorled and basal.

Simple and compound leaves

Now look at a single leaf.

  • Simple leaf. One blade on one stalk.
  • Compound leaf. Several small blades, called leaflets, on one stalk.

A compound leaf can look like a twig with many small leaves. Count it as one leaf.

A diagram. On the left of a stem, a compound leaf carries seven leaflets on one stalk. On the right, a simple leaf is a single blade.

Four leaf types

Many field guides sort woody plants by leaf type. If you know the type, you know where to look.

Fragrant sumac leaves, each made of three leaflets on one stalk.

Compound

Several leaflets on one stalk.

Small oval buckbrush leaves with smooth edges, above clusters of reddish-purple berries.

Entire

A simple leaf with a smooth edge.

An eastern ninebark leaf cut into three rounded sections, like a small maple leaf.

Lobed

A simple leaf with an edge cut into sections.

An oval American hazelnut leaf with small sharp points all along the edge.

Toothed

A simple leaf with small points along the edge, like a saw.

Examples of compatible shrubs

Three shrubs to leave

A dense buckbrush shrub with arching branches of small oval leaves.

Buckbrush

Also called coralberry. A low, spreading shrub, 2 to 5 feet tall, with small oval leaves and reddish-purple berries.

Fine at the edge

A low, spreading fragrant sumac shrub at the edge of a wood.

Fragrant sumac

A low, spreading shrub, 2 to 6 feet tall. Each leaf has three leaflets, which smell of lemon when crushed.

Fine at the edge

A tall, many-stemmed American hazelnut shrub in full leaf.

American hazelnut

A shrub 8 to 15 feet tall, with oval, toothed leaves that feel slightly fuzzy.

Fine at the edge

Examples of incompatible plants

Three plants to remove

A dense stand of Bradford pear trees covered in white blossom at the edge of a field.

Bradford pear

A tree 20 to 40 feet tall, with shiny leaves and white flowers in spring before the leaves come out.

Remove

Young tree of heaven shoots with long compound leaves coming up through mown grass.

Tree of heaven

A fast-growing tree, 40 to 60 feet tall, with long compound leaves. Cut it and new shoots come up from the roots.

Remove

A large multiflora rose shrub covered in small white flowers.

Multiflora rose

A shrub that forms thickets you cannot walk through, with compound leaves and small white to pink flowers.

Remove

There are more than six

A company’s compatible and incompatible lists usually run to dozens of species. The incompatible list often includes vines and herbaceous plants as well as trees and shrubs.

You do not need to know them all today. You will learn them over time, in field sessions and on the job.

What matters now is that you can look at a plant, describe it and check it.

A plant ID app

Many utilities give crews and planners a plant identification app for the field. An app like this can help you identify a plant, see how it can be treated and check whether it suits the wire zone or border zone.

If your company uses one, have it on your phone and be signed in before your first field session. Your supervisor or trainer can help you set it up.

Two hands hold a phone over sunlit grass.

The field guide

A plant field guide usually gives each plant its own page or card, with photos of the whole plant, the leaf, the flower and the fruit.

  • Leaf type. Where the plant sits in the guide.
  • Zone rating. Whether it suits the wire zone, the border zone or neither.
  • Height and spread. How big it gets when fully grown.

Learn where these sit on a page in your company’s guide, so you can find them quickly in the field.

An open plant book lying in the grass, with pressed plant specimens on its pages and a pair of garden shears.

When you are not sure

The app and the guide help, and they do not replace your judgment.

If you are not sure whether to treat a plant or leave it, stop and ask your supervisor.

It is better to take a minute to confirm a plant than to treat the wrong one.

Some plants can hurt you

Knowing your plants also limits your exposure to toxic ones. Poison hemlock, for example, is an invasive plant, and all parts of it are poisonous. Do not handle a plant you cannot identify.

What comes next for you

Your next step is a field session with a trainer. You will look at real plants and practice what you learned here.

  • Bring your phone, with your plant ID app set up if your company uses one.
  • Look at the whole plant first, then the leaf.
  • Ask about anything you cannot name.
Two people seen from behind walk a mown path across a wide grassy clearing.

Here are the main ideas from this module.

Key point 1 of 4

Keep or remove

Compatible plants stay low enough for the place they grow, and they compete with tall-growing trees. Incompatible plants are removed. In the wire zone, plants stay low when fully grown.

A wide corridor of grasses and wildflowers under a power line, with trees on both sides.
Key point 2 of 4

Start with the whole plant

A woody plant has a stiff stem with bark that lives through the winter. An herbaceous plant has a soft stem that usually dies back each year.

A patch of purple coneflowers in bloom on soft green stems.
Key point 3 of 4

Then read the leaf

Look at how the leaves sit on the stem, then at one leaf. Many field guides sort woody plants into compound, entire, lobed and toothed.

An eastern ninebark leaf cut into three rounded sections.
Key point 4 of 4

Check before you act

Use your plant ID app and field guide to check a plant and its zone rating. If you are still not sure, stop and ask your supervisor.

Two hands hold a phone over sunlit grass.

Plant ID complete

This sample ends here.

Photo credits

Finish every lesson on the path to complete the module.