Skip to main content
ID Atlas ID Atlas
Back to the courses

Graduate textbooks

Master's-level learning design textbooks

We wrote two textbooks of more than 200 pages each for a master's program in learning design and technology, one on design thinking and one on project management. Both are written for practicing learning designers, and each unit teaches the methods its project asks learners to use.

Design Thinking for Learning Design

243 pages · 8 units

  1. 1Foundations of Design Thinking
  2. 2Defining the Problem
  3. 3Learning Analysis and Profiling
  4. 4Learning Solutions and Outcomes
  5. 5Assessment Design and Alignment
  6. 6Designing Learning Experiences
  7. 7UDL and Accessibility
  8. 8Feedback and Iteration

Project Management for Learning Design

217 pages · 8 units

  1. 1Project Management Foundations
  2. 2Project Discovery
  3. 3Workload Estimation and Budgeting
  4. 4Project Planning and Leadership
  5. 5Stakeholder Management and Communication
  6. 6Adaptability and Risk Management
  7. 7QA/QC and Project Evaluation
  8. 8Project Management in Practice

Samples

Short excerpts from texts developed for a university master's program in learning design and technology, shown as work samples. The full texts are not published here.

Both texts · every unit

Story openers

Every unit opens with a short story about a learning designer working through the problem that unit teaches. Learners meet the problem the way they usually meet one at work, before they know which method fits, and the rest of the unit explains the methods the designer used.

Project Management for Learning Design · Unit 2: Project Discovery Excerpt

Diego, a highly-regarded learning designer, received a request for training from a local call center struggling with low employee morale and declining customer satisfaction. The company wanted to develop a comprehensive training program to improve agent skills and performance. Diego, always up for a challenge, began his usual process of digging deep to understand the root of the issue.

He spent some time observing agents at work, conducted interviews, and analyzed performance data. To his surprise, the issue wasn't a lack of training or skills. Instead, the culprit was the call center's dim lighting. It made reading call scripts difficult and caused constant eye strain, directly impacting employee morale and productivity.

Design Thinking for Learning Design · Unit 7: UDL and Accessibility Excerpt

Ashley, a learning designer at the Department of Transportation (DOT), felt a knot of anxiety tightening in her stomach. The deadline for compliance with the Americans with Disabilities Act (ADA) and Section 508 was looming, and the department's flagship online training program for new bus drivers was woefully unprepared. The goal was to achieve WCAG AA conformance, ensuring the program was accessible to the widest possible range of employees.

When she first raised the issue of accessibility with her manager, he'd scoffed, “To drive a bus, you need to be able to see, hear, and use your hands. Why are we worried about disabilities?” Ashley had patiently explained that accessibility encompassed a wider range of needs, including colorblindness, cognitive differences, and temporary impairments, and that, moreover, it was a legal requirement. Now, with the deadline fast approaching, her manager was finally starting to sweat. He knew that non-compliance could mean legal trouble for the DOT, and possibly even personal liability for him.

Design Thinking for Learning Design · Unit 2

Teaching passage: writing a problem statement

Concept sections explain what a good result looks like, break the method into steps, then work examples. This one teaches learners to turn their research into a problem statement. The worked examples repeat the same move three times, from an observation through the research findings to the statement, so learners can see the pattern before they write their own.

Design Thinking for Learning Design · Unit 2: Defining the Problem Excerpt

Formulating a Clear and Actionable Problem Statement

An actionable problem statement is the cornerstone of the design thinking process, providing a clear and focused direction for ideation and solution development. It's more than just a description of the problem; it's a call to action that inspires creative solutions and guides decision-making throughout the design journey.

As with human-centered design, an actionable problem statement is user-centered, placing the needs, challenges, and aspirations of the end-users at the forefront. It clearly articulates who is experiencing the problem and how it impacts their lives. Problem statements should also be specific and concise, avoiding vague or general language and providing concrete details about the problem. It should clearly define the scope and boundaries of the issue, avoiding unnecessary complexity or confusion.

Design Thinking for Learning Design · Unit 2: Crafting a Problem Statement Excerpt
  1. Synthesize Your Research Insights. Review your research findings and identify the most salient pain points, needs, and opportunities. Look for recurring themes and patterns across different data sources and use tools like affinity diagrams or mind maps to organize and synthesize your insights.
  2. Identify the Core Issue. Take your research insights and go beyond surface-level symptoms and pinpoint the root cause of the problem. Ask "why" repeatedly to uncover underlying causes and challenge assumptions. Consider the broader context and how the problem relates to organizational goals.
  3. Focus on the User. Clearly identify who is experiencing the problem and how it impacts their lives, work, or learning. Use empathetic language that reflects the user's perspective and emotions and avoid generalizations and focus on specific needs and challenges.
  4. Frame it for Action. Use active voice and verbs that imply a need for change or improvement and focus on the current state of the problem and its negative impacts. Avoid suggesting solutions at this stage; the focus should be on clearly defining the problem, not jumping ahead to potential solutions.
  5. Make it Measurable. Include or imply specific criteria that can be used to evaluate the success of potential solutions. Consider metrics related to user satisfaction, performance improvement, efficiency gains, or other relevant KPIs that emerged from your data collection and research.
  6. Keep it Concise and Clear. Aim for a problem statement that is clear, concise, and easily understood by all stakeholders—ideally, one or two sentences using plain language, free of jargon. While you want to create a strong problem statement upfront, remember it's an iterative process. Be open to modifying it as your understanding deepens, ensuring you're always addressing the root cause, which may not be obvious at the outset.

Example · Employee Onboarding

Initial observation

New hires are taking too long to become productive.

Research findings

  • New hires report feeling overwhelmed by the volume of information and lack of clear guidance.
  • Managers express frustration with the time it takes for new employees to contribute meaningfully.
  • Existing onboarding materials are outdated and not aligned with current processes.

Problem statement

The current onboarding process is overwhelming and inefficient, leading to delayed productivity, decreased employee engagement, and increased costs for the company.

Example · Online Learning Platform

Initial observation

Students are dropping out of online courses at a high rate.

Research findings

  • Students cite a lack of interaction and community as major factors in their decision to withdraw.
  • Instructors report feeling disconnected from their online students and struggle to provide timely feedback.
  • The platform's interface is confusing and difficult to navigate.

Problem statement

The current online learning platform lacks adequate tools for fostering student engagement and interaction, resulting in feelings of isolation, decreased motivation, and high dropout rates.

Example · Safety Training

Initial observation

There has been an increase in workplace accidents related to improper use of equipment.

Research findings

  • Employees express a lack of confidence in their ability to operate certain equipment safely.
  • Current safety training is perceived as boring and irrelevant.
  • There is a disconnect between the training environment and the actual workplace.

Problem statement

Inadequate safety training and a lack of hands-on practice are contributing to unsafe equipment operation, increasing the risk of workplace accidents and injuries.

Project Management for Learning Design · Unit 2

Worked example: measurable learning objectives

The project management text teaches objectives as part of project discovery, so they come straight out of the needs analysis. Each framework gets one full objective and a line-by-line breakdown of it. The breakdown is usually the part learners return to when they write their own.

Project Management for Learning Design · Unit 2: Writing Clear and Measurable Learning Objectives Excerpt

As part of your recommendations, it's important to develop clear and measurable learning objectives for the training based on the findings of your needs assessment and analysis. These objectives will serve as the foundation you develop your training on (assuming that training is indeed a good solution to the root cause(s) of the problem).

Example of a SMART Objective Excerpt

“Following a customer service skills training session, customer service representatives will be able to demonstrate active listening techniques (e.g., paraphrasing, summarizing, reflecting feelings) and propose a solution that addresses the customer's concern within 5 minutes of the initial interaction, with the aim of improving customer satisfaction and aligning with the company's customer service guidelines.”

In this example:

Specific
Following a training session on customer service skills, customer service representatives will be able to...
Measurable
...demonstrate active listening techniques (e.g., paraphrasing, summarizing, reflecting feelings) and propose a solution that addresses the customer's concern.
Achievable
...in response to a simulated customer complaint scenario.
Relevant
...with the aim of improving customer satisfaction and aligning with the company's customer service guidelines.
Time-Bound
...within 5 minutes of the initial customer interaction.
Example of an ABCD Objective Excerpt

“Given a customer complaint scenario, the customer service representative will be able to demonstrate active listening techniques and propose a solution that satisfies the customer, according to the company's customer service guidelines.”

In this example:

A (Audience)
Customer service representative
B (Behavior)
Demonstrate active listening techniques and propose a solution
C (Condition)
Given a customer complaint scenario
D (Degree)
Satisfies the customer, according to the company's customer service guidelines

Behavior (B) describes the observable and measurable action or performance that learners will demonstrate after the training. This portion of the objective should use action verbs that are specific and avoid vague terms like "understand" or "know" (these are BAD words in learning design!).

Both texts

Comparison tables and worked templates

The design thinking text compares each delivery format and learning approach in a benefits and challenges table. The project management text includes filled-in versions of the documents learners build in the course, including a work breakdown structure, a stakeholder grid, a change log and the risk matrix below.

Design Thinking for Learning Design · Unit 3: Learning Analysis and Profiling Excerpt

Experiential Learning

Learning through hands-on experiences, simulations, and real-world applications. This can involve field trips, internships, role-playing, lab experiments, and project-based learning.

Benefits

  • Authentic Learning: Provides authentic and engaging learning opportunities that connect theory to practice.
  • Skill Development: Enhances knowledge retention and skill development through direct application.
  • Motivation and Engagement: Can be highly motivating and engaging for learners who prefer hands-on experiences.

Challenges

  • Resource Intensive: Can be resource-intensive and may require specialized equipment or facilities.
  • Safety Considerations: May require careful planning and safety precautions, especially in certain settings or with specific equipment.
  • Accessibility: May not be accessible to all learners, especially those with certain disabilities or limitations.
Project Management for Learning Design · Unit 6: Adaptability and Risk Management Excerpt

Prioritizing Risks

Use a risk matrix to visually map the likelihood and impact of each risk. This helps prioritize which risks require the most attention and resources. Risks with high likelihood and high impact are typically prioritized higher than those with low likelihood and low impact.

Here's a sample risk matrix for an eLearning training design project, incorporating the likelihood and impact scales:

Risk Priority
Technology Failure (e.g., LMS outage, software glitches) Likelihood: High · Impact: Major Critical
Content Delays (e.g., SME unavailability, content revisions) Likelihood: Medium · Impact: Major High
Learner Engagement Issues (e.g., low completion rates, lack of interaction) Likelihood: Medium · Impact: Moderate Medium
Budget Constraints (e.g., unexpected costs, funding cuts) Likelihood: Low · Impact: Major Medium
Stakeholder Disagreement (e.g., conflicting feedback, changing requirements) Likelihood: Medium · Impact: Moderate Medium
Accessibility Issues (e.g., not meeting accessibility standards) Likelihood: Low · Impact: Moderate Low
Copyright Infringement (e.g., using unlicensed materials) Likelihood: Low · Impact: Major Medium
Outdated Content (e.g., information becomes obsolete quickly) Likelihood: Medium · Impact: Low Low

Design Thinking for Learning Design · Unit 1

Key terms, reflection questions and further reading

Every unit closes with the same three features. The key terms give learners the vocabulary the unit's assignments use, the reflection questions connect the unit to their own projects, and the additional reading points to sources for going further.

Design Thinking for Learning Design · Unit 1: Foundations of Design Thinking & Learning Design Excerpt

Key Terms and Definitions

Design Thinking
A human-centered, iterative problem-solving approach that harnesses the principles and practices of design to tackle complex challenges.
Empathy
The ability to deeply understand and share the feelings and perspectives of users.
Define
The process of synthesizing insights and framing them into a clear problem statement.
Ideate
The generation of a wide range of ideas and potential solutions.
Prototype
The creation of tangible representations of ideas to test and gather feedback.
Test
The process of gathering feedback and iterating on designs based on insights.
Human-Centered Design
A philosophy that places the needs, desires, and limitations of the end-user at the forefront of the design process.
Constructivism
A learning theory that emphasizes the active construction of knowledge and meaning through experience and interaction.

Reflection Questions

  • How can you apply the principles of design thinking to your own learning design projects?
  • What are some specific ways you can incorporate empathy into your design process to better understand the needs of your learners?
  • How can you leverage the power of collaboration and co-creation to generate innovative solutions in learning design?
  • What are some ethical considerations you should keep in mind when designing learning experiences?
  • How can you ensure that your learning designs are inclusive and accessible to all learners?

Additional Reading

  • Alrubail, R. (2015, January 3). Teaching empathy through design thinking. Edutopia.
  • Chiu, T. K. F. (2023). Impact of design thinking on teachers' professional development. Australasian Journal of Educational Technology, 39(1).
  • Kilgour, P. W. (2021). Integrating design thinking into instructional design: The OpenTeach case study. ResearchGate.

See how the courses use these texts

Assignments, the group project, the capstone rubric and the course map.

Graduate course design